Welcome to the Corvette Forums at the Corvette Action Center!

96 cam into a 85 L-98



I can get a great deal on a slightly used cam out of a 96 vette. I am wondering if it will work in an 85 L-98 and if so are there any other mods necessary to make it work?
Well, the 96 is a hydraulic roller.. your 85 is not..

The nose of the cam is different. I am not 100% sure you can use the later model cam in an early block. I thought I have heard of some guys doing this.. You will also need Aftermarket Roller Lifters which are not cheap and new push rods.

For the work involved unless it is Free I would pass. Not even sure how well it would perform due to the intaske differences
Thanks Bud.....you saved me from buying a boat anchor I did not need......:beer :beer

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors


MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Top Bottom