Is there a way to get rid of the warnings on the DIC for problems, without having to hit reset every time you re-start? We have 1 tire sensor out, and the stupid service tire pressure system message comes up every time we start the car...
DIC warnings...
- Thread starter Vettelt193
- Start date
c4c5specialist
Technical Advisor
HI there,
If you please, is this on the 96 that you own????
Or is it a c5???
Please expand, c4c5
If you please, is this on the 96 that you own????
Or is it a c5???
Please expand, c4c5
- Thread starter
- #3
nope, 1998 Pace Car... sorry about the confusion...
- Thread starter
- #4
so is there a way, or are we just SOL?
D
dmkoger
Guest
I have the same problem occasionally with my '00. Do you have aftermarket tires? If so, that may be the reason. They can interefe with the signal from the monitors. My right front sensor does not seem to want to work until Ive driven the car for about 20 mins. If you need to replace a sensor, theyre about $75 each at gmpartsdirect.com. But, if the tires are the problem, replacing the sensor wont change anything.
c4c5specialist
Technical Advisor
Hi there,
You can reset this code by going to diagnostic mode, and when you get to the last module, RFA.
Then, push and hold the reset button,till it show no codes.
this should buy you some time,
c4c5
You can reset this code by going to diagnostic mode, and when you get to the last module, RFA.
Then, push and hold the reset button,till it show no codes.
this should buy you some time,
c4c5
Similar threads
Corvette Forums
Supporting Vendors
Dealers:
