Welcome to the Corvette Forums at the Corvette Action Center!

Driver's Window Adjustment

  • Thread starter Thread starter kaos725
  • Start date Start date
K

kaos725

Guest
The driver's window on my 79 Vette does not roll up all the way. I replaced the motor a few years back and the window sealed fine. I just recently bought an Astro Shield one piece top and I now notice that there is about a 1/4" gap between the weatherstrip and the window. All I can think of is that the original weatherstrip must have been thicker. But as I look at the window it really should be up further...
Is this adjustment fairly easy to do? Any suggestions.

Thanks,
Andy

79 L-82
 
Hi Andy,

Yes, this is easy to do. Remove the door panel. There's an adjustable stop at the top of each window track. Loosen the 7/16 bolt on each one. Move the window up to position and tighten the bolts.\

Mike
 
Astro Top

How do you like that Astro Top? I saw it in Corvette Central Parts Brochure and was thinking about it for my 79.
Thanks,
Andy - 79BlackCoupe@comcast.net


kaos725 said:
The driver's window on my 79 Vette does not roll up all the way. I replaced the motor a few years back and the window sealed fine. I just recently bought an Astro Shield one piece top and I now notice that there is about a 1/4" gap between the weatherstrip and the window. All I can think of is that the original weatherstrip must have been thicker. But as I look at the window it really should be up further...
Is this adjustment fairly easy to do? Any suggestions.

Thanks,
Andy

79 L-82
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom