dynaspark installed

[94conv.]

we got the dynaspark installed, it was pretty straight forward once we got the pulley off, then we put on the new wires, the drivers side was bad but could've been worse, just loosened the power steering pump to make room in the back of it for the plugs to slip through. We havent started it yet, we're putting the water pump on it tomorrow and changing the oil, hopefully Ill be driving it to work tomorrow night.

 

[LT1-MP]

That's good stuff! Let us know how it works. I'm dying to hear a review.

 

[94conv.]

I wont be driving it to work tonight and probably not for awhile, unless it gets towed to the dealer, its throwing a code 18 and seems to be missing on the 1 3 and 7 cylinders, I think this because I unhooked the injectors to see if there was a difference
called dynaspark but of course they must have taken the afternoon off or something.
Anyway, Ill get something done with it next week

 

[94conv.]

Today we changed the plugs and things seemed to smooth out somewhat, I started the car after each plug change to see if I could tell a difference, after plug seven, the last and hardest one, it smoothed out some, I dont have the air cleaner tightened down all the way, waiting on the K&N but after lunch Ill tighten everything down and drive and see how it does. Plugs 3 and 5 seemed to have fuel on them but if wires were crossed Im sure itd be alot rougher then what it was and not smooth out after the plug change. I really hope this fixes it, if it does then the Dynaspark gets a thumbs up for now.