Welcome to the Corvette Forums at the Corvette Action Center!

Edelbrock Carb Neck Size?

74bigblock

Well-known member
Joined
Sep 30, 2003
Messages
1,163
Location
Barrington, IL
Corvette
2008 Z06
Anyone happen to know the neck size on edelbrock carbs? I'm hunting for a low rise air cleaner and need to ensure it fits.

Thanks!
Dave
 
74bigblock said:
Anyone happen to know the neck size on edelbrock carbs? I'm hunting for a low rise air cleaner and need to ensure it fits.

Thanks!
Dave

I have a Performer, i will check it for size when i get off work today.
Chas
 
Its the same as a Holley.If you use one of those generic 14 in. low profile air cleaners you will have to modify the bottom to clear the elec. choke on an Edelbrock carb.
 
74bigblock said:
Anyone happen to know the neck size on edelbrock carbs? I'm hunting for a low rise air cleaner and need to ensure it fits.

Thanks!
Dave

Just got home, the o.d. of it checks 5"...and sharkcar71 is right, i didnt modify my holder, but i turned a thin ring of bronze at work and raised it about 1/4 of an inch, to clear the choke module, and still stay under my hood by about 1/2 inch from the nut that holds it together.I can post a photo of the ring if you want.
Chas:_rock
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom