Welcome to the Corvette Forums at the Corvette Action Center!

Electronicals

RAMS18

New member
Joined
Apr 2, 2024
Messages
3
Location
Kalamazoo
Corvette
1982 white base
Hi, it didn’t take long to have a few questions.
There is a wire with the “connection” end broken off, shown in the first pic, that looks to be ground of some sort. Any one help? Thanks.
There is also a rivet on the passenger fender where the hood lays into. It has a blade style tab like where a female connector would go. Any help? Thanks.
There is red plastic box,unit thing that has a fairly substantial bundle of wires coming out of it. Any one help? Again thanks.
 

Attachments

  • IMG_5818.jpeg
    IMG_5818.jpeg
    692.4 KB · Views: 68
  • IMG_3805.jpeg
    IMG_3805.jpeg
    744.9 KB · Views: 60
  • IMG_3806.jpeg
    IMG_3806.jpeg
    406.1 KB · Views: 63
  • IMG_3808.jpeg
    IMG_3808.jpeg
    2.3 MB · Views: 60
  • IMG_5821.jpeg
    IMG_5821.jpeg
    504 KB · Views: 63
Picture one is a broken ground. The eyelet is broken. In picture 2 nothing is connected to it. In picture 3 looks like the old fashioned style noise suppressor for the alternator. This eliminates the alternator wine through the radio.
 
Hey thanks, first pic is in fact a ground, the second pic I figured out is where the hood snubber is attached. The red box thing…could it be part of a theft deterant system. The po had one installed using a round style key lock under the dash. The Vette is an’82.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom