Engine and Gear Box

[Havachat9]

Its been awhile since I put up a thread so I'll keep it short. I'm taking the engine and gearbox out so I can do all the seals,welch plugs etc. Is it easier to take both out at the same time or seperately. Any suggestions are very appreciated.

Cheers.

 

[duke94]

I've done it both ways and prefer one at a time. I get nervous with all that weight hanging on the end of my Harbor Freight made in China cherry picker. Plus as I recall you have to remove the rad support to pull it with the trannie still on.

 

[LVMYVT76]

I do know that I pulled my engine by myself and put it back in by myself, it took less than 5 minutes both times with transmission off. Now, you might do the same with the transmission on, but more to watch for by yourself. Hooking the automatic up was a breeze, manuals are also. i would put the bellhousing on first, if manual use.

 

[Havachat9]

K,nps. Sounds like seperately is the way to go.

Cheers