baxsom
Well-known member
went to the shop today to check on my engine swap.
old motor is out.
messed up heads are off. the #5 intake valve is definitely bent but with a new valve guide and valve it should be usable.
while it is apart they are going to reseal my transmission, replace my upper and lower control arm bushings, and boil out my radiator.
they said once the secondary work is done they can have it in and running in 2 days.
heres hoping.
old motor is out.
messed up heads are off. the #5 intake valve is definitely bent but with a new valve guide and valve it should be usable.
while it is apart they are going to reseal my transmission, replace my upper and lower control arm bushings, and boil out my radiator.
they said once the secondary work is done they can have it in and running in 2 days.
heres hoping.
