Welcome to the Corvette Forums at the Corvette Action Center!

Fiber rearspring rubber.

Peer81

Well-known member
Joined
May 21, 2003
Messages
2,497
Location
Netherlands
Corvette
'81 Black
Hello everyone,

I have a little question again, my rear suspention was compleetly redone (new rubbers, one new spindle etc etc.) But the rubber that was attached to the rear spring was not worth saving so we needed a new one....
Here in Holland they are not for save (only with an entire new spring), i can't also find it in the regular cataloges (zip, mid etc).
At this moment we have put some other rubber to replace the original but we don't know if it's correct.
We think to original rubber goes compleetly around the spring (in the middle) and now we only have it at the bottom and the top.
Does somebody here know if it's compleetly around or just at the bottom and the top?
And are the rubber parts available apart for the spring somewhere.. And the last question how is it attached? With glue or with hars (don't know if hars is english?.. attached vulcanicly...)
I hope somebody here know's it, because now it's not perfect..

Greets Peter.
 
Absoluutly nobody here with some pic's of there 81 fiberspring (center)??......

It would help my allot!

Greets Peter.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom