Welcome to the Corvette Forums at the Corvette Action Center!

FYI Pillar post weatherstriping

  • Thread starter Thread starter My8T1
  • Start date Start date
M

My8T1

Guest
I just got done replacing the W/S on the pillar posts of my 81,and i got lucky... when and if you ever do this make sure the slots in the W/S line up with the mounting screws,cause you might have to adjust to get window to seal properly.Like i said i got lucky and i had to adjust mine.

Ed
 
weather striping

Ed,

Been through that one. But not as lucky as you were. First off, got the wrong strip on the wrong side.;-( Well, after a few choice words and time, we finally got them right.

Glad you got lucky.

Bev.
copr/princess
 
pillar w/strips

Ed and Bev,
Thanks for the tips. That is one of those little jobs I have to do on the '81.

Tom
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom