Welcome to the Corvette Forums at the Corvette Action Center!

Grease Fittings

Cruise

Active member
Joined
Jan 24, 2002
Messages
38
Location
Barrie, Ontario, Canada
Corvette
1994 coupe
I have located the upper and lower ball joint grease fittings on my 1994.

In the repair manual that I have, that covers the C4 from 1984 to 1996, it indicates that there is / may be fittings for the steering linkages and the rear axle tie rods.

Does anyone know if those grease fittings exist for a 1994?
 

chuck

Well-known member
Joined
Feb 7, 2001
Messages
193
Location
Tallmadge,Ohio
Corvette
1977 Dark Red Coupe/Buckskin 04 Spiral Gray/Gray
I could never find them on my 95.:confused Chuck
 
T

TPI Thomas

Guest
I just did the fittings in my 86 and there were 3 spots up front (easaly reached by poping the hood) and 2 spots at the tie rods (one on each rear wheel) Hope that helped
 

jsinga

Well-known member
Joined
Nov 23, 2001
Messages
280
Location
Savannah, GA, USA
Corvette
87 Silver Coupe Way over 200k miles
The new tierods don't have grease fittings so that leaves only the upper and lower ball joints

JS
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Parts/Accessories:

Vetteskins

Advertise with the Corvette Action Center!

Double Your Chances!

Partners

Top Bottom