Headlight Bezel Screws

[4WDVETTE]

Need help - Its been a long time coming but, I am in the final assembly stages of my 66 coupe. I had no clue as to the screws needed for the headlight bezels so, I ordered new ones from ZIP. Got them and the kit came with 4 machine type screws and 4 self-tapping type screws. I thought they should all be the same. They are small and black. I am confused. Also, what screws are used on the vents at the base of the windshield?

Thanks for any help.

Steve

 

[BarryK]

Steve
I'm assuming the screws are probably the same as on the '65's? According to my '65 TIM&JG it says:

The bezels attach to the housing at each side with "a cadminum or zinc plated flat-head Phillips screw (1 per side) and at the bottom (when open) with two black oxide flat-head Phillips screws".

on the WS wiper vents, the screws are listed as "black Phillips screws with an unpaited black u-shaped clamp nut

hope this helps a little. sorry, it doesn't say anything about machine screws or self-tapping

 

[4WDVETTE]

Thanks Barry - I don't think I got the right ones. I appreciate the physical descriptions. I am going to pull out the bucket of unknown piceses and see what I can find.

Steve

 

[BarryK]

glad I could be of some help