grumpyvette
Well-known member
http://www.svtperformance.com/forums/showthread.php?threadid=98085
"It cost around 250 bucks in materials at home depot and 5 hours to make if you are handy with tools."
Id SUGGEST LOOKING LONG AND HARD AT THE DESIGN AND ENGINEERING BEFORE TRYING TO DUPLICATE THIS , BUT IF ITS BUILT CORRECTLY ITS STRONG ENOUGHT TO BE SAFE AND BEATS THE HELL OUT OF THE guys stands above
personally I would have screwed 3/4" plywood to both sides of all support structures/ramps and used a double sheet of 3/4" plywood with 2x4 internal bracing for the front of the ramps rather than a couple 2x4s to bolt both ramps together, obviously making it darker under the car but thats what drop lights are for and boxing the support structures with 3/4" plywood would add considerable strength
"It cost around 250 bucks in materials at home depot and 5 hours to make if you are handy with tools."
Id SUGGEST LOOKING LONG AND HARD AT THE DESIGN AND ENGINEERING BEFORE TRYING TO DUPLICATE THIS , BUT IF ITS BUILT CORRECTLY ITS STRONG ENOUGHT TO BE SAFE AND BEATS THE HELL OUT OF THE guys stands above
personally I would have screwed 3/4" plywood to both sides of all support structures/ramps and used a double sheet of 3/4" plywood with 2x4 internal bracing for the front of the ramps rather than a couple 2x4s to bolt both ramps together, obviously making it darker under the car but thats what drop lights are for and boxing the support structures with 3/4" plywood would add considerable strength
