LT4 How to manually access LT4 computer codes and parameters?

[LT4man]

How to manually access LT4 computer parameters?

I have a 96 LT4. OK, U.P.John, you know I am the stater of the obvious! :L

Gordon Killebrew showed me how to bring up computer parameters on the speedometer screen by pushing the buttons on the trip computer.

But............................................

I forgot! :confused

Is c4c5 specialist out here someplace? Or someone else who knows what the procedure is?

Many thanks in advance for all replies!

Save The Wave!

 

[KOPBET]

In diagnostic mode the speedometer will display trouble codes for the CCM, Real Time Damping, ABS, Air Bag, and PCM. Ground pin 12 of the diagnostic connector and turn on the key to enter diag mode.

Get's a little complicated after that for this post, so without you narrowing down the scope I'll stop there.

 

[LT4man]

Thanks for the quick reply!

I remember Gordon accessing things like RPM, gallons of fuel left in tank, all kinds of info that the car needs to make different calculations for the trip computer. I think there were other items that had to do with doors being locked or unlocked. All kinds of info on that speedo screen.

Save The Wave!

 

[KOPBET]

That would fall under CCM data

 

[6speeder]

http://corvettebuyers.com/c4vettes/ecm.htm

 

[KOPBET]

Do you want any more details?

 

[LT4man]

Many thanks for all the help!

Save The Wave!