Welcome to the Corvette Forums at the Corvette Action Center!

Jacking points?

wishuwerehere82

Well-known member
Joined
Sep 6, 2003
Messages
2,316
Location
Rochester, NY
Corvette
Red '82 Coupe,Sebring Silver '98 Coupe
Hi all,

I need to put my '98 up on jackstands in order to determine why my parking brake doesn't work. Where are the support points to place jackstands on the rear? I have some new rotors on order so I will have to put the back off the ground in order to figure out if my warped rotors and lack of E-brake are related.
Thanks!
 
wishuwerehere82 said:
Hi all,

I need to put my '98 up on jackstands in order to determine why my parking brake doesn't work. Where are the support points to place jackstands on the rear? I have some new rotors on order so I will have to put the back off the ground in order to figure out if my warped rotors and lack of E-brake are related.
Thanks!


Take a look at Hib's article:
http://www.idavette.net/hib/C5diy/c5diy1.htm


This one's pretty good to:
http://97vette.com/howto/carlift/index.html


Also the GM shop manuals have a section covering it.
 
Thanks guys!
My brake rotors and pads arrived this morning, and I will be replacing the old ones soon. I wish it was warmer than 25 degrees in the garage.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom