Welcome to the Corvette Forums at the Corvette Action Center!

kickdown cable and transmission linkage

  • Thread starter Thread starter ibanezplayer
  • Start date Start date
I

ibanezplayer

Guest
I've finally dropped in my engine and tranny and now I'm trying to figure out how the linkage and kickdown cable, and the spedo go back in to the driver side of the TH-350, and pictures and or diagrams would be greatly appreciated.

Thanks,
Ibanezplayer
 
Hey ibanezplayer

As no one seems to be chiming in, I'll try.


Dont have pictures or anything for a 76, but studied the assembly manual of an 81 (uses T350 std), and cable enters right next to the dipstick on the passengers side of the box near the rear.

Is then run forward and up over the bellhousing through a bracket on the inside of the rear drivers side rocker cover then to the carb, to a cam type arrangement on the carb spindle.

Not sure if 76 is the same, but as its the same box, might be worth looking at.

:beer
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom