Question: LQ9 swap in 72 convertible need help installing fuel pump lines and regulater on frame says to mount within 6" inches

[vert72]

LQ9 swap in 72 convertible need help installing fuel pump lines and regulater on frame says to mount within 6" inches

i am in the process of installing a LQ9 into my 72 convertible ,need help with fuel line the instructions says no more than 6" from tank i'm doing outside to save time and money thanks in advance zoom zoom

 

[KANE]

Hi!

I have done a couple EFI swaps on C3s over the years.

When I ran an external pump, I placed it on the frame rail next to the tank on the passenger side. I ran hard line from the top of the tank and then bent it 90 degrees to get over the corner of the tank and then another 90 degrees to get to the pump.

Ideally, an in tank pump is best, but you can run one on the frame back there. Just make sure you use the correct high pressure fuel lines- EFI runs a lot higher pressure as you know.