Welcome to the Corvette Forums at the Corvette Action Center!

Missing Part

cwerve74

Well-known member
Joined
Sep 17, 2003
Messages
132
Location
Memphis
Corvette
1974 454MT red conv
While working on the front suspention, I noticed what I think is a missing part on the front of the transmision bell housing. I can see the flywheel by just looking toward the the rear of the car. I am sure this is wrong. I will attach a picture of what I think is mising. I am calling it a dust cover. I am having trouble finding a seller of this part. Need a little help. 1974 454 with 4sp M21

What is the proper name for this part?

Who might be a supplier? Is this a generic GM part?

Any guess why it might be missing other than Bubba was here?

Lastly is it a bolt on with engine & transmiion in the car?
 
Thanks I knew that with a better name for the search It would be out there.


One last question: Looks like I need to remove the starter to get it on. Any other complications?
 
CW , if you can get the bolt(or machine screw) on the starter side.then you should be able to get the cover on without too much trouble.


ROBIN
 
The starter has to come off to install it - pull the starter, install the cover, put the starter back on.

:beer
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom