Need a little help/guidance

[TooTall]

On a short trip out of the office today I see that my oil pressure guage is pegged at 80. A quick check of the DIC tells me it's reading pressure at 128psi !!!!

After doing some research here I see that it is most likely a bad sensor and that it is located on the back side of the engine.

Could someone with a parts CD please send me a diagram to locate the sensor, or anyone with experience replacing one chime in with some advice.:confused

It would be greatly appreciated.

Thanks in advance.
Rob

 

[68Roadster]

TooTall,

Heres what the '04 manual says for replacement of the engine oil pressure switch......bad thing it says to remove the intake manifold.....I can scan that stuff if you desire....

Cee

 

[TooTall]

WOW! The diagram makes it look like quite the mess! Still not sure witch part I would be taking out.

 

[c4c5specialist]

HI there,
On the fourth picture above, it is the piece attached to the #2 connector.
Allthebest, c4c5

 

[TooTall]

Great, I'll see what I can do this weekend.
Thanks for the help all
Rob