Need Help Finding Jack Pad Part

[Baldie88]

I can't remember exactly what it's called but it goes on the pad of your floor jack. It allows you to get your jack between the pipes and lift the back of the car by the rear diff. I can't remember where I've seen them before but I just looked through my Eclkers, Corvette Central and MAD catalogs and naturally I can't find it now.

Never too early to make my list for Santa.

If you know where I can get one please let me know.

Thanks,

Baldie88

 

[Goodnt]

I believe what you are looking for can be found at www.thecorvettegadgeman.com. While I don't have one, recalled reading it in a thread. Just did a search and found the thread.

 

[Ken]

Here's what I did:

 

[MyOtherCar]

Hey Ron, the website he is referring to is "thecorvettegagdgetman" He forgot to include the "t"
Bill

 

[JonM]

corvettecentral.com part # 104605

 

[Baldie88]

Thanks guys.

Ken, if I could weld I'd do what you did. However I'd probably burn down the garage.

The part from Corvette Central is what I was looking for. I sure couldn't find the darn thing in their catalog.

Hey Bill, you missed a good autocross this past weekend. However one of our guys went off-roading. I'll pm you with a link to my pictures.

Thanks again

Ron
"Baldie88"

 

[94conv.]

Ive tride to get on www.corvettetgadgetman.com and I cant seem to find it, tells me page is unavailable. Where did you come across this site?

 

[MyOtherCar]

Ive tride to get on www.thecorvettegadgeman.com and I cant seem to find it, tells me page is unavailable. Where did you come across this site?

He has the website misspelled. It should read www.the corvettegadgetman.com

 

[WhalePirot]

www.corvettecentral.com part # 104605

[font=arial,helvetica,sans-serif]Fits between rear end and exhaust pipe. Replace the head of any jack with a 1-1/8 inch diameter post hole.[/font] Fifty bucks.

I didn't think it was okay to lift with the diffy. I use blocks and lift the rear frame, just inside the bumper.

I could not link to the gadget dude with or without the "t".

With a modded car, I've had a lot more jacking practice than I actually needed. :eyerole

 

[vetteguy]

I have one of those things from the Gadget man. It works great. Guy

 

[Goodnt]

Sorry folks. I did miss the "t" Regardless, I tried to log on to his site and was not able to either. Maybe he is out of business.

 

[Ken]

Sheesh! http://www.corvettegadgetman.com/products3.html :eyerole

 

[KOPBET]

http://www.corvettegadgetman.com/


Edit:Ken beat me to the sheesh!