Welcome to the Corvette Forums at the Corvette Action Center!

Need information on how to remove doors on 63

  • Thread starter Thread starter 63vetteguy
  • Start date Start date
6

63vetteguy

Guest
I need help once again. I need to remove my doors but I can't find but four bolts on the hinges I can feel more on the inside where the hinges are but it is the threaded end not the hex end so how do I get these doors off. Thanks
 
Book shows six (6) bolts through hinge and into door, watch for the shim pack between hinge and door. The six bolts are accessed through the door. Hinge to body shows three (3) bolts. Two can be seen easily in the door frame and one is hidden on the inside of the car at a 90 degree angle from the outter two. Page 1-14 in the book. If you don't have one, get one. Available from your favorite Vette house on CD or paper.
 
So your saying that I need to take the door panels off to access the hinge bolts in the door. I was trying to take the hinges off the post but either way is fine by me thanks
 
my 63 swc doors

looking across from the other side of car to drivers door. you can see the bolts and end of hinges.....
IMG_7035Small-vi.jpg
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom