grumpyvette
Well-known member
oil/magnets/bearings
take the time to read the links guys its WELL WORTH THE 2 HOURS IT MAY TAKE READING
put some in your oil pan to remove metalic dust
http://www.wondermagnet.com/dev/magnet42.html
use good oil
http://www.micapeak.com/info/oiled.html
http://www.dorianyeager.com/oilfilterstudy1.html
http://www.fernblatt.com/longhurst/engineoil_bible.html
use a good oil pump
http://www.melling.com/highvol.html
http://www.melling.com/engoil.html
http://www.melling.com/miscon.html
read this, and learn about bearings
http://www.babcox.com/editorial/us/uhs89734.htm
http://www.babcox.com/editorial/cm/cm99828.htm
http://www.ahooga.com/archive/messages2/6273.shtml
http://www.dragnbreath.com/Clevite/TN 22.html
http://www.dragnbreath.com/Clevite/TN 16.html
http://www.aera.org/Tech/tb1465r.htm
take the time to read the links guys its WELL WORTH THE 2 HOURS IT MAY TAKE READING
put some in your oil pan to remove metalic dust
http://www.wondermagnet.com/dev/magnet42.html
use good oil
http://www.micapeak.com/info/oiled.html
http://www.dorianyeager.com/oilfilterstudy1.html
http://www.fernblatt.com/longhurst/engineoil_bible.html
use a good oil pump
http://www.melling.com/highvol.html
http://www.melling.com/engoil.html
http://www.melling.com/miscon.html
read this, and learn about bearings
http://www.babcox.com/editorial/us/uhs89734.htm
http://www.babcox.com/editorial/cm/cm99828.htm
http://www.ahooga.com/archive/messages2/6273.shtml
http://www.dragnbreath.com/Clevite/TN 22.html
http://www.dragnbreath.com/Clevite/TN 16.html
http://www.aera.org/Tech/tb1465r.htm