Welcome to the Corvette Forums at the Corvette Action Center!

Oil pressure sending unit

jracer49420

Member
Joined
Dec 6, 2006
Messages
11
Location
hart, mi
Corvette
1974 stingray
I purchased a new oil pressure sending unit for my 74 and the the unit is larger than the old one that is on the car. Is this correct, are the new ones larger than the old? This is the unit that screws into the block next to the oil filter. The guys at NAPA tell me this is the right one, but I'm not sure. Thanks for your help.
 
There are at least two different swtches. One has a large can shape after the pipe nipple and the other just has a small black top with electrical spade on it. If you go to the online Corvette vendor catalogs they have pictures.

But it sounds like you have the wrong one. If you, your gauge will not read correctly.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom