Help! Order of body mount installation hardware

[3dale1]

Car is a 66 convertible. All I have is a box of bolts, rubber cushions, aluminum spacers, and shims; I don't have any idea how they all came apart--I didn't do it myself:W

I know I will have to play around with the number of shims, but what confuses me is the location of the cushions, and why I have aluminum spacers as well?

Can anyone help with the order of how these pieces install in each mount from the bolt to the cage nut? Pics would be great too

Thanks JC

 

[JohnZ]

All the body mounting hardware is shown in your '66 Assembly Manual, in section 1-Asm, sheets G2 and G3; ignore sheet G1, as that's for a coupe. The convertibles use an aluminum spacer at the #1 mount (where the coupe uses a rubber cushion).

 

[3dale1]

JohnZ,

I don't have a 66 AIM, this car isn't mine and I'm just helping a friend with it...but I do have an AIM for my 69.

I just referenced those pages in my 69 (G1 and G2) and assembly seems pretty clear.
It show a different part number for the #1 spacer (3941909) vs the 2 and 3 mounts (3842911), which leads me to believe they must be rubber.

I know my 69 uses aluminum at 1 and 4 so I am assuming this can hold true for the 66. Make any sense?