Welcome to the Corvette Forums at the Corvette Action Center!

Rear Alignment on a 77

  • Thread starter Thread starter Hunter
  • Start date Start date
H

Hunter

Guest
When I bought the car someone had installed a composit spring on the back. Now to align the rear you have to bend the old strutt rods to align. Are there ones that go with this spring that are adjustible. My right rear tire looks like it is leaning in at the top, so to correct this someone has bent the old rods to pull it in and it really needs to go in more. Help!!
Thanks Steve
 
Bent it scary .yes any major vendor ecklers ,corvette america will sell ajustable strut rods from street to race starting around $125 I installed a pair to correct the same problem now my wheels sit straight...................
 
When I first got my vette, it was obvious that someone lowered it on jack stands. BENT UP THE STRUT RODS! So, it wore out the tires at an alarming rate. The car was pigeon toed.

So, I had to replace them. They were really ugly. I went with a Vette Brakes set of rods. Never had a problem since.

Maybe if you look into it that may be one of your problems.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom