Welcome to the Corvette Forums at the Corvette Action Center!

rear end mods for drag racing, help?

  • Thread starter Thread starter jonszr1
  • Start date Start date
J

jonszr1

Guest
i would like to know what mmod , those of you that drag race have done to your c-4/zr1. i currently am running 12.20s A118mph and my 60 fts aer 2.02-2,06 . i have mt et street radials i have tried between 26-20lbs and am stuck there .I know i have the mph to get into the 11s if i can just get it to hook . i have tried all rpm ranges also. car mods are ported inj housings and plenum 410 gears headers rc inj and a dyno tune. i have run on my gtech 188 A118.7 mph on my test area on the street with a 1.8 60ft but cant get the same on the track . i have caled the gtech so its within .03 et and .o2mph by dialing it in on the track . anyone got any ideas ;help
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom