Welcome to the Corvette Forums at the Corvette Action Center!

Rear Hatch Seal

Florida Guy

Well-known member
Joined
Oct 16, 2003
Messages
166
Location
Florida
Corvette
'96 Torch Red LT4
The seal around my rear hatch is in excellent condition except at the leading corner on each side where the two pieces are glued together. They have separated at that seam. Has anyone found a glue or adhesive that I can use for repair. I know there are a lot of them on the market but I thought some of you might have repaired these seals and could let me know what works and what does not. No sense re-inventing the wheel when some of you have the answer.
Thanks for your help.
 
It will need to sit for 24 hours but GOOP really bonds strong and remains flexable. It will require pulling up one section to take the tension off the seal and the hatch will need to remain up till dry.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom