Welcome to the Corvette Forums at the Corvette Action Center!

Rocker Arms

wmjosjr

Member
Joined
Aug 10, 2012
Messages
5
Location
New Jersey
Corvette
2008 c6 coupe crystal red mattlic
I have a 2004 Z I would like to run 1.85 rockers SLP, Crane, Comp Etc. Steel, Aluminum, etc. which ever is better and Probably a cam at a later date. Any suggestions?
Thanks
 
I used Crane Gold Race Rockers on the LS6 in my 2004 Z along with Crane dual springs and titanium retainers.

Been in place for about 7 years with great results. On the chassis dyno, the rockers were worth 14.5 hp at the wheels and they moved the power peak up 300 rpm.
 
I used Crane Gold Race Rockers on the LS6 in my 2004 Z along with Crane dual springs and titanium retainers.

Been in place for about 7 years with great results. On the chassis dyno, the rockers were worth 14.5 hp at the wheels and they moved the power peak up 300 rpm.

Thanks Hib Halverson. Did you put a cam in? What size rockers did you use?
 
Sorry I haven't been back to this thread in a timely manner.

I used 1.8 rockers. The cam is stock.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom