Crispyc21
Well-known member
I was driving home from work and received a “Service Ride Control” message. It went away after about one minute. When I got home I checked the codes and here is what I got.
10PCM 1571H: ASR Desired Torque
38RTD C1725H: RR Shock Absorber Solenoid (Short to Voltage)
I have received messages “service ABS” and “Service traction control” in the past and they always go away after a restart and don’t show again for a couple weeks. Most of the time the service traction control message would appear after hitting a bump or after hammering it. Any ideas?
I unplugged and replugged some wires around by rear tires just to make sure everything was connected.
Anything else I can do?
10PCM 1571H: ASR Desired Torque
38RTD C1725H: RR Shock Absorber Solenoid (Short to Voltage)
I have received messages “service ABS” and “Service traction control” in the past and they always go away after a restart and don’t show again for a couple weeks. Most of the time the service traction control message would appear after hitting a bump or after hammering it. Any ideas?
I unplugged and replugged some wires around by rear tires just to make sure everything was connected.
Anything else I can do?