Welcome to the Corvette Forums at the Corvette Action Center!

Side Glass sticking

  • Thread starter Thread starter wluessen
  • Start date Start date
W

wluessen

Guest
Does anybody have any experience adjusting the side glass channels?
My drivers side window binds about 1/2 way up. The assembly manual shows an adjustment at the base of the window channel but I don't seem to have any adjustment slots as shown?
Has anybody else experience this?;help
 
The bottom of the rear glass run channel is adjustable in-out at the bottom attachment at the rear face of the door, and the front run channel in-out adjustment is by a stud and nut at its bottom end (behind the door trim panel). Both channels are straight and the glass is flat, so binding at half-travel may well be related to the window regulator and/or the rollers and tracks; cleaning and re-lubricating them (Lubriplate) usually works wonders.
:beer
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom