R
RexNZ59
Guest
I've ordered an AIM for my 1975 convertible which is going to be a great help,but I think it's not going to arrive until after I need the car on the road.:W:W If anyone out there has an AIM for that year and can answer me a couple of questions I'd be most grateful.
(1) How many mounting blocks were used on the windshield frame when installing the windshield...... where were they placed (measurements from edges or anything) did the windshield have to be in an exact position etc etc....
(2) Under the stainless header,on top of the windshield frame, does the manual say how much foam was used, thickness...... and does it give a name to the sealant used on the foam.
I know that I'm asking for a bit here and the AIM mightn't give all the answers but any information will help me to beat the cut off date
Thanks everybody
(1) How many mounting blocks were used on the windshield frame when installing the windshield...... where were they placed (measurements from edges or anything) did the windshield have to be in an exact position etc etc....
(2) Under the stainless header,on top of the windshield frame, does the manual say how much foam was used, thickness...... and does it give a name to the sealant used on the foam.
I know that I'm asking for a bit here and the AIM mightn't give all the answers but any information will help me to beat the cut off date
Thanks everybody
