64 Plymouth, I loved old MOPAR metal... Especially the days of the HEMI.
My very first car (1965) was a black 48 plymouth 4dr, with a 55 Dodge Red Ram 331 Hemi with a 3 speed manual. Couldn't find an aftermarket shifter, so I built one with two pieces of angle Iron bent to form "Handles" pointing to each side (wrapped with black electricians tape). Used a 5/8 inch bolt with half a dozen washers between the angle iron handles, and a piece of 3/4 inch pipe on each side to the support pieces of more angle iron. On the level, I could start in 2nd, but it still would lay one heck of a patch, cause i would get it to move forward just a little bit, then slip the clutch, rev it up, then side step it.
Too bad that winter we had a snap of way below zero weather, what I had for anti-freeze was apparently too weak, cracked the block. Woulda been a neat car today.