C 
		
				
				
			
		celeryman22
Guest
Hi guys, I just got the motor and I am ready to fire it up.  I already jumped the started and it turns over.  So, now I have connected the ignition up and this is where I am having problems.
 
I have 1 large wire going to large post from the battery. 2 red wires with fusable links? going to the same post. 1 purple wire to one of the smaller terminals, what one should it go to inside or outside??
 
Now when I turn the key I get nothing, I have a small clicking noise come from a green colored "box" near the shifter, what is this?
 
Any suggestions on where i should start trying to figure this out?
 
Thanks
Mike
				
			I have 1 large wire going to large post from the battery. 2 red wires with fusable links? going to the same post. 1 purple wire to one of the smaller terminals, what one should it go to inside or outside??
Now when I turn the key I get nothing, I have a small clicking noise come from a green colored "box" near the shifter, what is this?
Any suggestions on where i should start trying to figure this out?
Thanks
Mike
 
	 
 
		

 
 
		 
 
		 
 
		


