Still throttle body problems

[jimmers]

I posted awhile back about my throttle body sticking. I havent been able to work on it for awhile, but i took it for along drive today and noticed somthing strange. When i change gears the rpms go down just like they are supposed to. But when i push the clutch in the rpms go to about 3000 and stick. Why is that? Even if i am driving and the rpms are at about 2 and i push the clutch in they jump up to 3. Any ideas guys? Ive greased the throttle cables and cleaned out the throttlebody very well. Could it be a sensor?

 

[Mart]

I'm just gonna throw out a couple of suggestions here,

Have you checked the TPS?
Set min idle and IAC

I also remember hearing something about the cruise control causing issues, I will have a look for that article in CF.

Mart

 

[jimmers]

well i set my minimum idle and the tps voltage to .5. At WOT it only goes to about 2.5 volts, and i read it should go to about 5 volts. My cruise control doesnt work.

 

[Mart]

Your TPS sounds out of wack.

Here is the CorvetteFever article on cruise control.

http://www.corvettefever.com/howto/82001/index.html

 

[Vettefan87]

Yeah, I think your TPS might be bad. Mine goes up to around 4.8 volts or so. 2.5 is way to low.

 

[WhalePirot]

You can disconnect the cruise control cable, if you feel it may be part of the problem.