temp gauge

[Robin7TFour]

does anyone have an exploded diagram of the mounting of the water temp gauge on a 74 C-3. i need to identify if all the insulators are in the proper location.

thank you

robin

 

[Robin7TFour]

dann, i am looking for the gauge (or back of) mounting to the main gauge bracket
i am trying to make sure i am not accidently grounding the temp gauge

thanks


robin

 

[JOliver]

email me again


Jason

 

[OldSchool]

The two insulators go on top and bottom between the frame and the lug connector. There is also one that goes in the middle so the top and bottom lugs do not touch middle wrapping.

 

[Robin7TFour]

old, thanks , i'll be pulling the gauge cluster to check that out.



robin :BOW

 

[Robin7TFour]

GREETING ALL, i have found out what is wrong with my temp gauge. it is missing the cross insulator. see the third set of pictures on the ebay sale. now, i have to find or make one.


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34206&item=2447429918


any suggestion?


robin :dance

 

[vmrod]

What is it made of? The top of a plastic butter dish may work. (If all you need is an insulator.)

-Vic

 

[Robin7TFour]

HELLO,the spare pieces i have for an old amp gauge seem to be made of some sort of rough-texture ceramic. i am going to the elec shop at work and see if they have any small fiber discs for insulators..worth a shot..



thanks to all.


robin