Welcome to the Corvette Forums at the Corvette Action Center!

Third brake light 87 covertible

  • Thread starter Thread starter patrolman4
  • Start date Start date
P

patrolman4

Guest
Need help getting to the third brake light bulb on my 87 ragtop. 1 bulb out and its driving me crazy. Cant figure ou how to replace. Thanks
 
brake light

I was able to figure it out and hope I do not have to do it again.
 
:upthumbs

I know what you mean by wishing to not have to do it again anytime soon, at least as far as the tailights are concerned. :hb
 
patrolman4 said:
I was able to figure it out and hope I do not have to do it again.
Could you tell me how you did it all three of mine are out and i hope that they are just the bulbs, but i havent got around to doing it after I bought the car.

Thanks
 
replacing bulds 3rd brake light

First remove the four wierd screws holding down the filler cover where you put gas in. The whole cover plate comes off then you remove the rubber around the gas filler tube. Be careful, chances are the rubber is old and will tear, had to order a new one. Then you can reach in and there is a screw at each end of the light cover plate. Remove the screws and the bulbs are inside of the piece that comes off. Replace bulbs and reverse process. A lot of swearing and cut hands, hopefully wont have to do it for another 15 years. Good Luck. Let me know if you need additional info.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom