Third Tail Light - Whats it cost?

[Rain]

Trying to find a replacement third tail light cover.
Mine has a small crack in it, probably due to a prev. owner leaning on the rear while pumping gas.
Don't see it on ebay, dont see one in Ecklers or Mid America.

Really dont want to cover it up with the vinyl CORVETTE black out either.

Any ideas what one will set me back and whether the local dealerships carry such a part?

Thanks
Rain

 

[Vanity Plate Bob]

Think just the lights for a Blaxer was like $100. Bunch little bubls wired in series. It is like fifteen inches long and goes at top of the door.

Nuttin cheap anymore. Not like days of old and the 39 cent tailight.

VBob

 

[KOPBET]

Is this what you're looking for:

http://www.ecklers.com/product.asp?pf%5Fid=26841&dept%5Fid=1379&mscssid=G93P3AQWP3UN8HEH8FFSD4L011490B66

I've bought one cheaper at Zip but can't find it there anymore.

gmpartsdirect.com should have it but I will have to find the part number.

 

[JonM]

91-96Stop Lamp Third Brake in bumper except ZR-1 494216 29.35


http://corvettecentral.com/

 

[KOPBET]

Found it at ZIP ... $28.50


http://www.zip-products.com/Corvette_Late/productr.asp?pf%5Fid=L%2D449&gift=False&0=dept%2Easp%2Cdept%5Fid%3D399%26menu%5Fid%3D%26Tree%3D%2CElectrical%20Components&1=dept%2Easp%2Cdept%5Fid%3D403%26menu%5Fid%3D%26Tree%3D0%2CHeadlight%20%26%20Exterior%20Lamps&2=dept%2Easp%2Cdept%5Fid%3D404%26menu%5Fid%3D%26Tree%3D1%2C3rd%20Brake%20Light&Gift=False&HSLB=False&mscssid=B8EB983125FB4C318A39E49EE41565DC

 

[Rain]

Yea, I guess thats it.
Do I have to replace the entire lamp housing or just the outer cover/lens?

 

[KOPBET]

Yea, I guess thats it.
Do I have to replace the entire lamp housing or just the outer cover/lens?

It is all one piece Rain, unfortunately.

 

[Rain]

closer shot:

 

[Rain]

Gotcha - Thanks
Hard to replace ya think?

ALSO

How about the corner marker lights?
Have the shop manual but cant tell if Im spose to remove the entire front bumper or if I can get to it from inside.

It is all one piece Rain, unfortunately.

 

[KOPBET]

Gotcha - Thanks
Hard to replace ya think?

ALSO

How about the corner marker lights?
Have the shop manual but cant tell if Im spose to remove the entire front bumper or if I can get to it from inside.

Piece of cake. Just remove the license tag and reach up inside with a 1/4in. drive 7mm socket I believe. Two screws and a twist of the lamp socket and it's out.

I think you may be right about the front light. I I think recall some discussion in prior posts. Might check a search.

 

[MARKSC4]

That must be a weak spot. That's exactly the same location and shape of the crack in my lens too.

It really is amazing the info you can get here!