Trouble with fuel lines.

[OLDCHEV]

Just replaced the water pump on my 90 Vert. Cannot get the fuel lines to line back up where they connect to the fuel rails.

They are quite a way off. They do not want to bend very easy.

Any suggestions?

Thanks

 

[Larry's Yellow Rdstr]

Get an inexpensive tubing bender kit at your local parts store and try to bring back the correct bends and contours of your fuel lines. Be careful and make the changes slowly.

 

[redc4corvette]

Remove the bolt that holds the fuel filter inplace and that should give you some room,make sure the bolt that holds the lines at the intake is loose.

 

[PLRX]

OldChev, do not force fuel line!!! Take your time and disconnect the fuel lines from the rail. Be safe!