Welcome to the Corvette Forums at the Corvette Action Center!

What size is the wedge screw in the 66 steering column collar?

magicv8

Well-known member
Joined
Mar 18, 2003
Messages
656
Location
Going too fast over the hill.
While the column was out of the car the screw must have dropped out. I reinstalled the column and noticed the play ion the collar - and that the screw was missing. What size screw do I insert?
 
As far as I know, only the '63 column housing used a wedge and screw; the '65-'66 housing was attached to the mast jacket tube by a round retainer plate that engages the "tangs" on the end of the mast jacket under the turn signal switch, which is attached common with the turn signal switch screws.
:beer
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom