Which Mufflers To Use?

[Ludigdrums]

Just wondering what's best and what will fit on an 81 as far as mufflers go? One of mine's rotted away, and I figure it's probably best to replace both.

What are your suggestions?

Please also see: http://corvetteactioncenter.com/forums/showthread.php?s=&threadid=37106

Thanks!

- Jeremy

 

[MaineShark]

Dynomax Ultra-Flo

That's what I have, and I lovei t

Joe

 

[mvftw]

I just put on Stainless Steel Flowmaster Delta 50's...very happy!!!

 

[Ludigdrums]

Cool. So, my only concern is that they will fit. How did you know they would?

Any other suggestions?

Thanks!

- Jeremy

 

[JBWeaver]

Stainless steel Magnaflows sound great and look Bad A**.

 

[mvftw]

The Flowmaster has the factory look, all you see is the chrome tailpipe (that's the look I wanted). They will Not bolt right in. You should bring it to a shop, they will have to make up a curved pipe to fit the straight pipe on the flowmasters.

 

[cmegga]

I have the Monza style dula baffled pipes threw mid america.
I love them, sound and look outstanding


If you like a loud well tuned sound with the advantage of straight pipe this is the one for you.

 

[wallyknoch]

Walker Dynomax is the best fit and the best quality. Bolt right on as OEM.

 

[Alwyn678]

Flowmaster 40's with an H or x pipe headers and 2.5 exhaust

 

[iron cross]

Flowmaster 40's with an H or x pipe headers and 2.5 exhaust

They sound like grapefruit cans!

 

[Copdogcorvettes]

I'd go with the 2 1/2 pipes and the Monza's they look great and better. The coast is less than most of the rest too. I had them on my 78 until I changed to the Hooker side pipes.


Gary

 

[Alwyn678]

They sound like grapefruit cans!

On your car maybe .....but not on mine..Sorry for your problems:L

 

[iron cross]

On your car maybe .....but not on mine..Sorry for your problems:L

I don`t have any problems, because I don`t use them. No tin cans for me.

 

[Alwyn678]

I don`t have any problems, because I don`t use them. No tin cans for me.

I could care less what you use or how they sound on your car.....They sound great on my car but then again you are stock:J

I am not

 

[iron cross]

I could care less what you use or how they sound on your car.....They sound great on my car but then again you are stock:J

I am not

Go to http://www.nitroalley.net and see if I run anything stock. Look it over. But don`t miss the A990 Cuda page and start the engine just for the hell of it.

 

[Alwyn678]

Go to http://www.nitroalley.net and see if I run anything stock. Look it over. But don`t miss the A990 Cuda page and start the engine just for the hell of it.

Congrats you are the king and my car sounds like a grapefruit can.......Happy.......you are the winner......:eyerole

 

[Ludigdrums]

Well, I did a bunch of research and decided to go with the Dynomax Ultra Flows. Found out that my pipes could use replacing also, So, I'm redoing the thing from the collectors back. What size Pipes...2.5" I know that stock was 2.25". I have headers, taking off the cats, no AIR pump, Edlebrock Performer Intake, Holley Carb.

What's my best route.

Getting done Thursday!

Thanks!

- Jeremy