Help! Window won't roll up after full down

[bbrown41]

Hello,
I'm new to Corvettes. Just picked up a 94 coupe STD yesterday. Today I installed the front disk kit to quiet down the rattle, what a difference. My problem is if I roll the drivers window all the way down the up switch doesn't work, if I open and close the door it will come up. If I roll the window down and stop before it bottoms out it comes up fine. Only have a problem when full down. Thanks i;helpn advance.
Bob

 

[philbillyvette]

I had a similar problem on a 97 Grand Prix GT. It was one of the relays in the door, the window would roll all the way down and basically the motor would not get the signal to stop roll down and trip the circuit due to overload, after a bit of time it would reset and allow you to roll it up.....Maybe the same thing....This was on a car with the auto roll down feature, not sure if they were in the 94 Vettes or not, but you definently have an electrical issue, maybe just a loose connection or something..

 

[boomdriver]

Hello,
I'm new to Corvettes. Just picked up a 94 coupe STD yesterday. Today I installed the front disk kit to quiet down the rattle, what a difference. My problem is if I roll the drivers window all the way down the up switch doesn't work, if I open and close the door it will come up. If I roll the window down and stop before it bottoms out it comes up fine. Only have a problem when full down. Thanks i;helpn advance.
Bob

its probably set up similar to headlite doors with limit switches. The banging of the door opening or closing jars the switch to re(set) it. Might just be an adjustment or loose connection.