Yo Chris

[vigman]

These people make a cool after market reverse switch & bracket

www.lokar.com

I saw it in a march hot rod mag ( forgot the title of the rag)

and you will have to dig a bit at this site..

But it was a trick setup ( not to knock yours, but it was a bit "Oil Can!")


Mike

 

[69MyWay]

Thanks,

I am dropping them a line. Right now I only see them for automatics.


I agree. That has to be about the most Bubba thing on my car. If I run with it, I should at least take some time to cut and trim the bracket down to the bare minimum.

 

[69MyWay]

Mike,

You made a great point by giving me this info. In fact, I did some searching, and found nothing bolt on to do the trick.

I need your input when you guys see me making a major blunder. Mike, you called it right. That bracket looked like Bubba was having a brain fart day.

So, since there is nothing right away available, I sharpened my pencil, got out the hacksaw, grinder, paint, etc. and came up with this.

Does that look any better?

Here is what it looked like before.

 

[vigman]

Wellllllllllllll

It's better.......
I KNOW I SAW THAT BRACKET!!!!!!

( I'll keep digging)

It's the same basic idea but its a stamped unit.

Mike

 

[vigman]

Got the rag

Street Scene March 2002 issue
( a publication of the national street rod ass.)


On page 29 I see the bracket & switch however it is inverted for your application ( I think ) could be the slide is backwards when they set the add.

Their # 1-865-966-2269

Note
I could not find this part on their web page
and of course there is no part # in the add

It just sez Backup light and neutral safety switch ( lower right corner of add )


Mike

 

[69MyWay]

Thanks,

I will check it out in the morning.

Got the engine in there tonight!!!!

 

[vigman]

Yeeeeeeeeee HAWWWWWW

Great news

Mike