Welcome to the Corvette Forums at the Corvette Action Center!

65 master cylinder

brumbach

Well-known member
Joined
Mar 6, 2004
Messages
330
Location
Middleboro, KY
Corvette
1965 convertible
Anyone know where I can buy matching bolts that hold the non-power master cylinder to the firewall? Doesn't look like a common item carried by any of the main suppliers for midyears.

Thanks,

Bill
 
Bill, those were 3/8"-16 round-head studs with a knurled section where they were pressed into the flanges on the brake pedal support; if you just use 3/8"-16 bolts from the inside instead, nobody will ever know the difference.
 
Bill, those were 3/8"-16 round-head studs with a knurled section where they were pressed into the flanges on the brake pedal support; if you just use 3/8"-16 bolts from the inside instead, nobody will ever know the difference.

Thanks, John.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom