Welcome to the Corvette Forums at the Corvette Action Center!

Hub Bearing trouble ?

july349

Member
Joined
Apr 12, 2008
Messages
14
Location
United States
Corvette
1996 Green Coupe
;help
I have been told by the dealer service manager that the left rear Hub Bearing in my 96 vette is loose and should be replaced. The car only has 55,075 miles on it and I don`t race it, so how can they be bad. I know that rear bearings can go bad, so I`m not ruling the possibility out that they are bad, I just want to make sure that I`m not going to get ripped off by the dealer.Any advice or suggestions will be greatly appreciated.Thanks !

Frank E
 
;help
I have been told by the dealer service manager that the left rear Hub Bearing in my 96 vette is loose and should be replaced. The car only has 55,075 miles on it and I don`t race it, so how can they be bad. I know that rear bearings can go bad, so I`m not ruling the possibility out that they are bad, I just want to make sure that I`m not going to get ripped off by the dealer.Any advice or suggestions will be greatly appreciated.Thanks !

Frank E
Jack it up and Check it!! Grab the wheel at 12 and 6 o'clock and try to pick up the wheel like your wanting to tear it off!!How much movement does it have??;shrug;shrug
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom