Recent content by Gdad45

Corvette Wheels I also work on-line for Eckler's. They have an amazing selection of wheels for 1997 and up Corvettes. Corvette Wheels And Tires Have fun!!

Wheels and Tires Hi, I have a 2000 black convertible. I got it Nov 2014. It has Foose wheels and 19 inch Falkens on the front and 20 inch Continental Extremes on the rear. I'm thinking about taking those off and getting stock rims and mounting the new Continental Extremes on them. They are...

E. Dead Mother-In-Law

Thanks.

Yes. Disconnected the relay. All is well.

Sitting in the car alone, engine off, key in acc, listening to the radio, rain coming down steady. Hear a hum. The right seat is moving forward. Went all the way forward and then sat and clicked trying to go further. Have had the car for about one year. Never saw this before. Reached over and...

Fixed Installed the LMC5 wiring. AWESOME instructions with color photos. Fixed it just as advertised.

Filled up with gas yesterday and couldn't leave the pump! Moved the steering wheel just a bit before turning the key (apparently has the new lock plate installed, never locks). Immediately got a WAIT 10 SECONDS and then SERVICE COLUMN LOCK. Had the car a year and put 13,000 miles on it with no...

Rear Window Still Holding Tight Did a trip from Kentucky to Boston, Ma and back. Heavy rainstorms on the way up. No leaks at the rear window. Did a couple of 90-100 MPH bursts on the way back. Window's holding tight. Rhino Glue is awesome.

Convertible Rear Window Read the post about Rhino Glue and decided to give it a try. FANTASTIC ! Had to cut out all the wood glue somebody had tried. It was crystallized and had expanded. What a mess. Took about two hours with a razor to clear it out. Fabric on outside top edge had curled...

Apparently I did mess up the clock spring. On the next ride the Airbag symbol lit up. Horn still works.

Maybe I'm too simple. Tried that. Did you see my post earlier about the spastic volt readings I saw?

No manuals or testers in the near future.

Fun With the Volltmeter Got a good ground with the black lead Probed the back of connector for the middle blue wire. Is that the right procedure? If I did that correctly I think I'm screwed. When at rest, no matter what orientation of the wheel, I saw either .1 vdc or 11.4 vdc. When moving...

I read everything Sorry to imply I hadn't read the links. Just posting a clarification question. Thanks for giving me that information. With so many parallel/overlapping threads and links it's hard to keep track of who's posting what. I'll be pulling out the multimeter this afternoon.