Recent content by wipeout

OOps I forgot theres like 10 feet of snow outside and my car is under a tarp. But if your not in a rush as soon as some snow melts I will send you the pics just let me know your email. :confused Art Jett your setup sounds sweet. Did you make brackets and bolt them into the seat belt bolts to...

Seeing as how you have a 74 and the flat glass my setup would be perfect for you. I have 2 10 inch subwoofer in the back of my 77 and still have room to put my t-tops and luggage. What I did is I created a bracket that bolts into the seatbelt hole. And holds the box into the air against...

Hello, Just wondering if anybody knows of someone that is good at rebuilding the trailing arms in canada. Dont want to pay all that shipping and broker charges to cross the border.

I ordered interior door handles. But when I go to install them the screw goes in at the wrong angle. And if I use the one from the other door then it does not fit correctly with the grooves in the door. Do I have different year door panels or what????

Thanks for all the help guys finally got her going. Hooked up the old brake lines and pushed that piston in and out for like a good 20 minutes just to make shure. Lots of pressure now.:D

All i got was some plugs for the ports. Per the instructions it said to install the plugs and the cover and push the piston in and out no more than 1 inch until it is firm. Didnt ever seem to become firm. But i only did it for like 2 minutes. Usually i use some old brake lines and route...

When you bleed the master cylinder how far in do you push the piston. Says in the instructions to only move it 1 inch. But if I push it further more bubbles come out. Also how long does it usually take to bleed it. :eyerole

Seems pretty simple. The only hard part is getting the outer bearing off of the spindle. Which you will need a special tool. Also getting the spindle out of the trailing arm. Yet another special tool. You will also need another tool to set the bearing play. :ohnoes

I just put a new RR caliper and rear lines going from calipers to flex hose which i replaced last year. Also a rebuilt master cylinder. Now im not getting any pressure to the rear brakes. I have also bled the master cylinder twice so far. Is there a way or a need to reset the proportioning...

Cant find the link either. Could someone email it to me please. Thanks. datingsas@yahoo.ca

Light Sockets :bash man must of had a brain fart on that one. LOL

Hello, I was wondering if somebody could tell me where to get the plastic twist holders for the center cluster lights. I have a 77 and 3 of them are missing. Thanks PS i dont know what the name of them are. The lights goes in them and they twist into the casing and make contact with the...

Great thanks alot. I thought that maybe the cable would run thru that area. I will have to look and see about that dimple and cutting the panel. Looks like the screws attache themselves to the door panel itself. My chrome piece has a long tube in the back where the screws go. Does that make...

thanks for the reply , I do not have the original door panels. they were replaced with aftermarkets in 1991. So i believe when that was done they did not bother to install the adjuster in the door panel and just layed it in the bottom of the door instead. So how would i go about cutting up...

I just finished replacing the outside door handle. At the same time I would like to finish installing the side mirror adjuster which was never done by the previous employer. Wondering if anybody has a tutorial or could instruct me as to where and how you install the bracket on the door for the...