Search results

Here is a pic of a 77 I did a few years back Your column should look like this.

Great work. Wish my CE looked that good.

Congrats, From a fellow Ga guy. :w

No, I posted this up on a few forums no response. I wish I did have it for the # as I have 91 #118. Funny thing is I also have an LT1 95 with #228

I was looking thru some stuff I have and found a build sheet the NCM had sent me for the wrong year. Its for 1990 #118 Black/Gray. Will be happy to pass it on If I can find the owner.

Sound like you need to do a complete system bleed, You have a distribution block on the frame under the master cylinder follow the line down, You will find a wire and a low pressure switch on the block, this is the switch that lights the dash light when pressure is to low...

I just removed the door from mine.

Congrats ... Nice lookin C3

Best wishes and Get well soon Gordon. I went to both the C4 and ZR-1 class in 02 and have meet him and Chris many times over the years. mlm0, Thank you for the update.

Did you replace the one in the console? or this one? look at the top of the box right side firewall There is a plug with the resistors for the speeds looks like this may have the high speed one burnt out. 72 82 C3 CORVETTE NEW A C BLOWER MOTOR RESISTOR GM | eBay

If you have to remove the dash drop the steering column or you will stand a chance of breaking the dash. Hope these help should be close to the same as 74. http://willcoxcorvette.com/instructions/dash_pad_removal_instructions_new_with_pics_2.pdf http://content.mamotorworks.com/pdf/602779.pdf...

Is the whole mirror assembly is lose? or just the head? Ether way you will most likely have to remove the glass to get to one of the 2 nuts that hold on the base assemble to the door. If its the head you will have to remove the mirror and there are s screws up in the base that get lose. They...

Welcome....Nice C3 I like the color.

You can replace just the frame work around the doors and the large frame. You will have to paint to match and do some fitment of the frames to the doors and get some small screws or glue to reattach the frame to the doors as they were glued on with heat from the factory. You keep your old doors...

Just looked at the sales brochure does not list it...Best i can remember is I get 18-24mpg. 84 CF lists 16-27

Yes, keep looking hopefully you will find one from an individual that was well taken care of. My 04 has 160K miles and looks better than that.

Thanks, yes 4 of them I also have 96 CE LT4, one day I'll get them all out for a new family photo. 36 years of Corvette ownership. :D You can always get a manual fan switch kit so you can control when you want to turn them on or have it reprogrammed to a lower temp. I have my ZR-1 fans set to...

Not sure if anyone posted this, you do realize that factory settings on the fans with ac off are fan 1 on at 225, fan 2 on at 2 235, plus or minus 5 degrees.

That I have just did not want to paint them and have to deal with a repaint every year to keep them chip free and looking nice. With the original finish all I have done over the last 11 years is wash them every time I wash the car. My hope was to just find a left in gray, and it is a dark gray...