Welcome to the Corvette Forums at the Corvette Action Center!

Search results

  1. DDLS3

    Out playing with a BMR on da interstate yesterday evening...

    Dwayne, Just read this tonight.....sorry to hear about your mishap. But man you have made a wild ride out of "Ole Yella" now.....:thumb Dale
  2. DDLS3

    Help! No brake lights

    I've got a new one ordered! Tested the switch again and it was intermittent.........worked when it wanted to :r so bye bye. As soon as it comes it will be re-assembly time. Dale
  3. DDLS3

    perplexing Electrical problem with rear lights

    danc5, My problem turned out to be the hazard switch as neither of my R or L brake lights worked, only the middle light. If you have a voltage tester, locate the large plug at the base of the steering colume that connects to the muti-function switch. (turn signal, headlights, cruise control...
  4. DDLS3

    perplexing Electrical problem with rear lights

    danc5, If you still have an issue with no brake lights on one side after checking your wires, I think I can help. Just spent way too much time troubleshooting a similar issue with no brake lights except the center high mount. I have a pretty good understanding now. Dale
  5. DDLS3

    Help! No brake lights

    Thanks Jesse...gmjunkie After a look at them "skeematics" it was no doubt the hazard switch. A bit of testing confirmed that. Finally tore the dash apart and got the dang thing out. Took it apart, cleaned it with some denatured alcohol and reassembled it. Plugged it in and retested, and the...
  6. DDLS3

    Question: 82 Vette -- Oil Leak from under Right Dash

    I'm voting vacuum lines if indeed it's oil, why it occurs after an oil change is a mystery as it should happen all the time or not at all. Dale
  7. DDLS3

    Help! No brake lights

    Well hopefully Paul will see this post soon. I'm a little surprised that nobody has seen this before. It would be great to have a starting point. I think I'll take a run at tearing down the steering colume and take a look at the stem switch unless someone has another suggestion. ;shrug Dale
  8. DDLS3

    Help! No brake lights

    Anyone seen this before? The 4 large brake lights on my 02 have quit working. Bulbs are good, flashers work, turn signals work, the 3rd brake light (middle light) comes on when the brake is applied but none of the others. ;shrug Is it the brake light switch? Why does the middle light work and...
  9. DDLS3

    Need new tires Michelin vs. Goodyear? Thoughts?

    I have Michelin Pilot Sport ZP's on the front with a still very serviceable pair of EMT's on the rear. I am very happy with the Michelin tire, handles better than the EMT's that were replaced. Dale
  10. DDLS3

    C5's Sure Is Running Good...

    Remo, The snow should melt in another month or so :rotfl I've had mine out all week back and forth to Bowling Green.:Steer Dale
  11. DDLS3

    Yellow Tagged.. THANKS

    Now that's good news Bud :upthumbs it is hard to believe that it took so long to find the shock stuffers. I will tell ya though the Chevrolet dealer in Bowling Green is pretty disappointing. I've had the 02 in there 3 times for the same issue, and it's still unresolved, so maybe I shouldn't be...
  12. DDLS3

    C5 air box question

    I replaced my stock air box with a Donaldson Blackwing and it made a very noticeable difference. If you are going to modify the top of the stock box or go to any open filter like the blackwing you will absolutely need to install the aftermarket seal at the front of the hood to keep water off...
  13. DDLS3

    ANyoen know of a good price for Tire pressure sensors

    I got mine here last year http://www.gmpartsdirect.com/catalog/frameset.cfm you will need to add the nut if you want to replace it an additional $5. These are GM parts not aftermarket. Dale
  14. DDLS3

    New CRAY Scorpion Wheels

    Getting the EMT's on and off the rims is a bit of a challenge. But like I said, and apparently so you have discovered, the right machine and properly trained techs are both needed to accomplish the mission. I was lucky to find a local dealer here in Scottsville, but rest assured that if I had...
  15. DDLS3

    New CRAY Scorpion Wheels

    :boogie Dwayne you are bad..... Dale
  16. DDLS3

    New CRAY Scorpion Wheels

    You absolutely need a new a tire guy!!!! I've replaced a sensor, and bought a complete set of tires in the past 2 years. I have stood in the garage and watched as the tires were removed and reinstalled on the rims not 20 feet away. If your tire shop has modern equipment for aluminum rims and has...
  17. DDLS3

    Abby (2003 Anniversary) Delivery Date (Amarillo, TX) 01/26/2008!!

    Bud, Great to hear that "The Day" has finally come. I'm certain that you and Nanc will be on that first ride with latte in hand early today. Enjoy....sounds like it might even be a top down day there in Amarillo. Dale
  18. DDLS3

    Not that Old but...

    It was 2001at the Rendezvous, I have a similar picture of a "Blue" 81.....:w Do ya remember this pic? How is that "ole Dawg" anyway 2001 Event
  19. DDLS3

    I-80 east to west

    Your a brave guy if ya go I-80 from Jersey to Ohio. I traveled that route this summer to Maine and like to knocked the wheels off my C5. Rough was an understatement. Came back 81 to 64 and acrossed WV back to KY. Much prettier ride and excellent road.
  20. DDLS3

    Do I need a new tire senser?

    Actually gmpartsdirect is cheaper by a few bucks GM PART # 10438853 CATEGORY: All PACK QTY: 1 CORE CHARGE: $0.00 GM LIST: $156.16 OUR PRICE: $81.20 DESCRIPTION: SENSOR (sensor only) 97-00 corvette only (does not include nut or oring seal) 10268438 seal 10268439 nut Dale
Back
Top Bottom