Search results

Yes, that was culprit. Disconnected the switch and all was well. Ordered new switch and brass gear for both headlights (both headlights grinding, replaced the stops also). This morning pulled both headlight drives, took apart and put new gear in, resealed and clamped, then tackled replacing the...

Busy summer and I hadn't thought about Carlisle since early spring. Saw the C8 pics and thought about sneaking up there Sunday(2.5 hour ride) but realized my weekend is booked...grrr

I replaced the heater core in an 89 I had and was told before I did it that there's a reason it's labeled as Part # 000001. Not a fun job..

Been there, done that..want me to tell you of 4 hrs of diagnosis when I replaced the injectors on my old 89 and I couldn't get it started?? #1, you need gas in the tank.

Absolutely no water intrusion on passenger side, would have noticed when I pulled fuse. When it first happened, cycled the wiper plus pushed the wash button in and out rapidly, no change at all. Appreciate your thoughts, thank you.

Any advice or odds that it's the wiper motor or switch (stalk)?? 2001 Z06, 30k miles, previously a garage queen (cowl, wiper motor and udders pristine) Started car and wiper/washer went on and wouldn't stop. Pulled fuse and started research.. Lots of posts here and other places to wade...

You would be amazed at the amount of time, letters and phone calls it took for me to get them to officially announce the C8 on my birthday.

And I forgot to....:L

Bought a 2001 Z06 a week ago, and before buying ran the VIN to see what recalls had been done (had the steering lock issue in the back of my mind)..Well, the recall was never done on this car and within a couple days had the steering lock up. Ordered the LMC5 fix and ordered a new battery. In...

o2 sensor wire - CorvetteForum - Chevrolet Corvette Forum Discussion This any help?

As suggested, I just disabled it. As I said, it was a minor annoyance. Thanks

Sold my 1999 C5 with 130k miles and bought a 2001 Z06 (32k miles) I feel I got a heck of a deal with very little out of pocket money after the sale of the 99 and buying the 2001. Car is immaculate, interior looks brand new, body/paint showing no mars or dings. Carfax came back clean. Car showed...

^yeahthat

:lol: I fight that battle all the time..and no, I haven't bought the seal yet, I did notice you have to buy drivers' and passengers side, guess that makes sense..or cents..

Tom, getting ready to attempt replacing the outer window seal on drivers side...Any words of advice?? I realize this is a old thread but nothing ventured, nothing gained..:)

Had that with the PCV hose coming from the right valve cover on my 99. Good advice.

If it's parked for the winter, a perimeter of moth balls.

You ought to buy the FSM for your year, I believe zip corvette has them. Had a 89 and gave my FSM away when the buyer of the 89 said he didn't need no service manual. The FSM comes in very handy for everything. Perhaps someone here might help you out with a scan or something, but you should...

On a lot of the threads I have seen about LEDs, most state ballast resistors need to be installed. *But* most of the threads I read apply to C5s, a C3 may be a different electrical animal.

1st corvette I drove was a 69 L88 that a friend's parents bought for him(crazy,huh?). I had a Honda 350 at the time and this friend was crazy about motorcycles so he swapped me for a weekend..I was in 7th heaven all weekend and swapped back on Sunday night. 10 minutes after I left to go home, my...