Welcome to the Corvette Forums at the Corvette Action Center!

Search results

  1. 86PACER

    A day of projects (Flowmaster and bushing related)

    What a difference. Fortunately, mine still look good.
  2. 86PACER

    Lowering the '86

    All you need is a jack to carefully lift the rear spring up and releive the stress on the lower nut. Then just swap bolts, drop the new bolts in place and gently allow the spring back down onto the lower nut. No need to remove wheels or raise the rear off the ground. Drive the car some to...
  3. 86PACER

    CHILTON'S manual mistake - Beware

    I agree. Worth every penny. I got mine on ebay for $42 and is in great condition.:D It has paid itself and saved me un nessesary work in the short time I've had it. If you can't get one of these, the Haynes is your next best choice, but still a far cry from the Shop Manual.
  4. 86PACER

    CHILTON'S manual mistake - Beware

    Fuel pump replacement is a 10 minute job, and having to remove the fuel tank is rediculous. I seen other similar mistakes in the Chiltons manual about replacing the door handles. It calls for removal of unnecessary items. All you need to do is remove the door panel, not all the BS it says you...
  5. 86PACER

    Moronic Question Here (lights)

    Actually, early C4's have a mechanical mileage odometer that can be read with everything off, instead of a digital odometer like the late C4's that turn off when the key is out.
  6. 86PACER

    Moronic Question Here (lights)

    I agree. Only if the key is in the "On" position. Just turning the headlights on with the key out does not light the dash.
  7. 86PACER

    Finally found it!

    I had a similar "clunk" sound. It was cause by a loose rear spindle nut. Took me a while to think of checking that before I found it.They need to be torqued to 165 ft. lbs. Easy check if you have not done it already.
  8. 86PACER

    anti lock light

    I use mine as a daily driver but also have a back up car.
  9. 86PACER

    Too Much Oil - Dealer Oil Change

    I agree. Chevy dealers have very high labor prices. The least they could to is fill your motor up to the proper oil level.
  10. 86PACER

    My MODS so far.... Thanks Forum!!!!

    :beer Here is another free mod for you. The "Throttle Body Coolant Bypass" I did not see it in your list of mods. What you need: Buy an 18" long piece of 3/4" diameter hose with a 90 degree bend on one end from your local parts store. Should not cost more than $5. How to do it: 1.Drain some...
  11. 86PACER

    Thermostat woes on '85

    You should have enough room and a straight shot by just removing the Throttle body off the plenum only.
  12. 86PACER

    Turbocharging an L98?

    Pro Charger offers a kit for 85-91 L98/ TPI Vettes. See it here: http://www.procharger.com/automotive.shtml
  13. 86PACER

    Does anybody know what this goes to??

    Update The Bose System RPO code is indeed in my RPO sticker. Also, there is a similar connector under the opposite side speaker. It has the same color wires as the Shop Manual shows for as the "RH Rear Amplifier/ Speaker Unit" This proves without a doubt that my 86 came with the Bose System...
  14. 86PACER

    Does anybody know what this goes to??

    cablexpert Thanks for the Info!:w Going to the garage to check that now. Thanks.
  15. 86PACER

    Does anybody know what this goes to??

    That's a good idea. The Shop Manual shows a "RH Rear Amplifier/ Speaker Unit" as well. The color wires for this one are Light Blue, Dark Blue, Black, and Pink. If I find another disconnected connector with these color wires on that side, guess you can say I found my answer. I am going to go...
  16. 86PACER

    Does anybody know what this goes to??

    There was. I removed it to gain access. The speaker is off to the side, note visible in the photo. It has aftermarket 6x9 speakers and an aftermarket Clarion stereo with a 6 disc CD changer. I beleive the original owner removed the Boset system and installed this one. Does anyone know what the...
  17. 86PACER

    Does anybody know what this goes to??

    I have standard seats. The hatch release works fine so that can't be it. I beleive it's for the Bose system that this car had at one time before I bought it. I think it's for the "LH Rear Amplifier/ Speaker Unit" Shown on page 8A-150-3 of the 86 Shop Manual.on the top right hand corner. Rich...
  18. 86PACER

    Does anybody know what this goes to??

    In the process of discovering a severly corroded ABS Control Module Relay, I found this 4 wire harness sitting on top of the other ABS Control Module connectors disconnected. I found that all the ABS harnesses and connectors in there are plugged in, except this one. I could not see anything that...
  19. 86PACER

    headers????????

    I have the Hooker 2151-1. Same thing except mine have no emissions fittings and are ceramic coated. They give way better spark plug access that the stock ones. Fit is great. Expect a long day if it's your first time installing long tube headers. Stock dipstick will no longer secure to the header...
  20. 86PACER

    how do you check front wheel bearings

    Better it happened then than on the freeway. It would have been a catastrophy. Wow!:( :(
Back
Top Bottom